Customizable voltage 12 months warranty Back Cantilever Lift
Mechanical Parking Garage for car workshop
This is multi-column design equipment. The ground level can only
slide right or left, the top level can only lift and the middle
levels can both slide and lift. Except the top level, there's an
empty space on each level that can slide right or left. Cars
parked/unparked by the lifting of car pallets on top level, the
sliding of car pallets on ground level and the lift and sliding of
car pallets on middle levels. Parking space on ground level can
park/unpark car directly. When parking/unparking car on middle
level, the car pallets that underneath the parked/unparked car all
slide right or left to leave an empty space and make the empty
space just underneath the parked/unparked car. So the car pallet
can reach to ground level, then the car can be parked or unparked.
1. The system structure is very flexible and can be arranged
according to your site condition and requirements. 2. About awning
design, can be designed according to your requirements, such as
full awning type , part awning type and simple awning type and no
3. Save land area and take full use of space, the parking quantity
is about 5 times compared with normal plane parking lot. 4. Low
equipment cost and maintenance cost.
5. Lift smoothly and with low noise, convenient for car goes in or
6. Comprehensive security protection system, such as safety
anti-falling hook, mechanism detect people or car entering, car
parking limit mechanism, interlock mechanism, emergency brake
7. Adopt PLC automatic control system, use button, IC card and
remote control system, make operation very easy.
Car lift Standard Export Package.
Usually it takes 3 weeks after receving your receipt payment .
However, it would depend on our production line schedule(the timing
clients place order)and the complication of the item.
|Suitale Parking Cars||Model||Small Car||Mid-Size Car||Large Car||Over Size Car|
|Car Size Length*Width*Height (MM)||≤4400×1750×1450||≤4700×1800×1450||≤5000×1850×1550||≤5300×1900×1550|
|Rated Speed||Lift Speed||4.1m/min||4.1m/min||4.1m/min||3.7 m/min|
|Drive Mode||Hydraulic(lift);motor and chain(Sliding)|
|Power||3 Phase 5 Wire 380V 50HZ||3 Phase 5 Wire 380V 50HZ||3 Phase 5 Wire 380V 50HZ||3 Phase 5 Wire 380V 50HZ|
|Control Mode||Button,IC Card and Remote Control System||Button,IC Card and Remote Control System||Button,IC Card and Remote Control System||Button,IC Card and Remote Control System|
|Surface Treatment||Galvanized and Painting||Galvanized and Painting||Galvanized and Painting||Galvanized and Painting|
|Inner Width of Pallet(MM)||1930||1980||2030||2080|
FAQ & Caontact